Zeiss Axio Imager Z1m microscope configuration
Zeiss Axio Imager Z1m Microscope for reflected-light brightfield and transmitted light,
with phototube 30°/25.
With motorized convenience and PC interface, consisting of the following items :
Stand equipment for reflected light/ transmitted light
Axio Imager.Z1m microscope stand with Z-drive mot. and TFT monitor focusing drive motorized, stepsize 10 nm
dovetail for attachable stage carriers adapter plate for tubes
430010-9901-000
Light Control mot. incl. USB, RS 232 and TCP/IP interface - with external 12V DC 100W power unit, stabilized, 100V...240V AC/ 50...60Hz/ 230VA
USB cable and country-specific line cable
Z-drive operation, flat; right
430051-0000-000
7-position objective nosepiece, HD M27 mot.
424502-0000-000
6-position reflector turret mot. for P&C modules
424907-0000-000
Reflector module brightfield ACR P&C for reflected light
424928-9901-000
Reflected-light illuminator mot. for FL and HD
423601-0000-000
Stop slider mot. with centerable luminous-field diaphragm
423612-0000-000
Stop slider mot. with centerable aperture stop
423614-0000-000
Diffusion disk for reflected-light illumination, switchable
423632-0000-000
Double filter wheel, discrete, mot. 2x
428301-0000-000
Neutral-density filter set D/A, d=25 2x
487931-0000-000
Transmitted-light illumination mot. for "Axio Imager"
423901-0000-000
Shutter for transmitted-light illumination, switching time < 200 ms
423621-0000-000
Binocular phototube 30°/25 (100:0/30:70/0:100), reversed image camera port with interface 60N
425502-0000-000
Transmitted-light/reflected-light stage carrier
430704-0000-000
Condenser carrier with vertical adjustment on both sides
430705-0000-000
Dust protection Set L
434304-0000-000
12V 100W halogen illuminator
100 HAL lamp housing with collector 2x
423000-0000-000
Halogen lamp 12V 100W 4x
380079-9540-000
Power supply 12V DC 100W stabilized
90...246V/50...60Hz/225VA, 0...12V DC
000000-1128-574
Extension cable for HAL 12V 100W
457411-9050-000
Optical equipment
Objective EC "Epiplan-Neofluar" 5x/0.13 DIC M27 (WD=15.8mm)
000000-1156-511
Objective EC "Epiplan-Neofluar" 10x/0.25 DIC M27 (a=9.3mm)
422342-9900-000
Objective EC "Epiplan-Neofluar" 20x/0.50 DIC M27 (a=2.1mm)
000000-1156-521
Objective EC "Epiplan-Neofluar" 50x/0.80 DIC M27 (a=0.58mm)
000000-1156-527
Objective EC "Epiplan-Neofluar" 100x/0.90 DIC M27 (a=0.31mm)
422392-9900-000
Eyepiece PL 10x/25 Br.foc. 2x
444034-0000-000
Eyepiece eyecup 2x
444801-0000-000
Achromatic LD condenser 0.8 H DIC
424206-0000-000
Camera Adapter 60N-C 1" 1.0x
426114-0000-000
Net Graticule 10 x 10, Ne11a
01BSP210
Stage Micrometer S21
02A00410
Magnification Systems (Optional)
5-position tube-lens turret, man., with Bertrand system
tube lens 1x and Bertrand system already integrated,
3 positions for optionally usable tube lenses
425301-0000-000
or
5-position tube-lens turret, mot., with Bertrand system
motorized switching, tube lens 1x and Bertrand system already
integrated, 3 positions for optionally usable tube lenses
425302-0000-000
Note: Tube-lens turret mot. 425302-0000-000 can only be used with stands mot. M1m or Z1m.
Plus, also optional
(Important note: tube-lenses can only be installed at the factory) :
Tube-lens 1.25x for "Axio Imager" 425303-0000-000
Tube-lens 1.6x for "Axio Imager" 425304-0000-000
Tube-lens 2.5x for "Axio Imager" 425305-0000-000
Tube-lens 4.0x for "Axio Imager" 425307-0000-000
|
